DGZ系列對輥式擠壓機造粒機，采用幹法造€‌‌粒工藝，常溫造粒，成型率高(₩∏§gāo)。可生産φ∞¶3.2-φ6.0mm的(de)球狀、扁球狀或不規則狀顆粒，一★©∞λ機多用。廣泛用(∑σyòng)于肥料、醫藥、化(hu←λ₩§à)工等行業裡粉體(↔£tǐ)物料造粒；特别适用于硫酸铵、氯化(huà₹→α¥)铵、硫酸鉀、氯化鉀、二元及多元複合£Ω★&肥、鹽類等顆粒肥料。與相關設備配套.∑↔單機或多 機組合,能形成時($εσshí)産 1-50 噸的(de)連續性、機械化生(s≤‌¥±hēng)産線。

DGZ series of roller←♥≠ extrusion machine gr'≠‍anulation machine, using dr£ y granulation process, room tempera★♦↔₩ture granulation, high£♦γ★ molding rate. Can produce φ3."✔€£2-φ6.0mm spherical, flat ball or irr♣☆ ☆egular particles, one machine.γ≈ It is widely used in ¶®₽ granulation of powder materials©← in fertilizer, medicine,<≈‍' chemical industry and other i∏↓ndustries; especially for ammoni←♣um sulfate, ammonium↔  chloride, potassium sulfate, pota♥÷←ssium chloride, binary and multip≤✘σ→le compound fertilizer, salδ♣‍<t and other granular fertilizers.•↔φ→ Supporting the equipment with ±®≠∏the relevant equipment. Singleφγ machine or multi-machine ↑→ combination, can form 1-50 tons of ¥εcontinuity, mechanized production π→ line.

對輥擠壓造粒機是利用兩個(g>€☆€è)相對旋轉軋輥的(de)擠壓∑♦Ω力來造粒成型的(de)。兩個鋼制¶∑ (zhì)軋輥表面有均勻排列的(de)半球狀凹坑模型，其模型直接在αλδ鋼筒表面，不可更換。粉料由攪拌機的(d€↓ e)下料口進入兩個輥筒之間，軋輥上₩☆↓(shàng)的(de)兩個對應半球型模在加滿料後，相Ωβ(xiàng)對擠壓，兩個半球​←λ就合成一個扁球狀顆粒。型模一(yπ ī)般都小于半圓，否則不易脫模。成型後的€☆(de)顆粒因旋轉軋輥的(de)離心力被甩出型模，下σφ©落到出料口，和沒有成型的(de)粉體¶€β原料一起經出料口出料。

The roller extrusion granulator isφ©↓¥ formed by using t↓×he extrusion pressure of t↔δ★€wo relatively rotating rollers‍∞€Ω. The half-ball pit model is ev✔©πβenly arranged on the sur∞★βface of the two steel rolls, "←§§which is directly on the surface of t©↕≠÷he steel cylinder and cannot be © replaced. The powder enters be₩"¶¥tween the two rollers by the feeding ©  port of the mixer. The two co$<™rresponding hemisphere molds on the r'®✘oll are squeezed relatively after £→₩σfilling the material, an ‍d the two hemisphereβ≥β↕s form a flat spherical∞ ♥> particle. The mold is general∏¥₽"ly less than the semicircle,"↓> otherwise it is not eaε≠λsy to die. After forming, the p®απarticles are thrown out of the mold →σdue to the centrifugal force of t×γhe rotating roll, and fall to t✘☆πhe outlet, and discharge<>₩ through the outlet t↑ ≠ogether with the unformed powder raw m•♠ aterials.

産品優勢 product superiorit®‍y

1.同動力，産量高，焦化級硫铵産量單台每小(xi♥≤↑δǎo)時可達1.3-1.≈™¶‍5噸（145-220型擠壓機）。

2.精度高，易調試，可100%達到ε→模具重合，且不易跑孔，穩定性好。

3.故障率低，擠壓機材質好，肥料原料接觸點都(dō•←u)為不鏽鋼材質，使用中不$→£ 易腐蝕。

4.輥皮使用壽命長，輥皮壽命ε↑保800噸以上的(de)産量！

5.維修簡單快速，多處使用>≤ε快拆的(de)鏈接方式。

6.可以生産多元素複合肥，且β¥γ 顆粒飽滿圓潤。

1. With power, high output,←∑ the output of coking gra "de ammonium sulfur can​  reach 1.3-1.5 tons φ÷§per hour (145-220 extruder).

2. High accuracy, easy to d♥>±ebug, can achieve 100% of the mold•≤ overlap, and not easy to run ✔‍♣holes, good stability♥©ελ.

3. The failure rate is low, the≤₩₽ extruder material is good, and tδ<he contact point of fertilizer raw∏≤ materials is stainless s↓€βteel, which is not easy to corrode in'↔α use.

4. The service life of t‌§<₽he roller is long, and the life of¥ελ  the roller is more than 800 &♠λtons!

5. The maintenance is simple "‌δ←and fast, and the quick demol↓₹ition link method is used in many pla♣♠ces.

6. It can produce multi-element comp≠≠ound fertilizer with fu←♣↑ ll and round grains.